Glass cutting line with movable storage racks
2.Optimized Load Capacity, Reducing Floor Dependence and Maintenance Costs 3.Independent Drive Design, Enhancing Operation & Maintenance Efficiency and Production Continuity
4.Compact Layout, Significantly Saving Floor Space
5.Shortened Glass Movement Path, Reducing Breakage Risk
6.Flexible Positioning Logic, Lowering Precision Dependence Threshold
7.Simplified Structure with Low Failure Rate and Convenient Maintenance
- Product Description
Glass Cutting Line with Movable Storage Racks HSL-YPCC4228 for 4200*2800mm Glass
Shandong Huashil Automation Technology Co., LTD supplies the HSL-YPCC4228, a patented, space-saving glass cutting line with movable storage racks for factories that process large glass sheets. The line handles a maximum glass size of 4200*2800mm and loads glass from 3 to 19mm thick, with single sheets up to 1.5T. The glass rack carries up to 8T and runs at a maximum of 15m/min. A motor unit drives the rack directly and works with a movable loading machine, which keeps the structure simple and helps reduce purchase cost and routine maintenance.
Key Features of the HSL-YPCC4228
- Simplified structure: The design is intended to lower the overall cost of owning the line.
- Higher rack load capacity: The rack carries up to 8T. The design depends less on the floor, which may reduce floor maintenance.
- Independent drive design: Operation and maintenance are easier, and production runs with fewer stops.
- Compact layout: The line takes up less floor space in your workshop.
- Shorter glass movement path: Glass travels a shorter distance during handling.
- Flexible positioning logic: The line does not demand extreme precision, which makes setup and daily operation simpler.
Glass cutting line with movable storage racks Specifications
| Parameter | Value |
|---|---|
| Model | HSL-YPCC4228 |
| Max Glass Size | 4200*2800mm |
| Loading Glass Size | 4220*2800mm |
| Loading Glass Thickness | 3~19mm |
| Loading Glass Weight | ≤ 1.5T |
| Maximum Load Capacity of Glass Rack | ≤ 8T |
| Glass Rack Depth | 280~470mm |
| Maximum Operating Speed of Glass Rack | 15m/min |
For any specification not listed above, please contact us.
Core Advantages
The glass cutting line with movable storage racks is built around three design choices.
- Direct drive plus movable loading: A motor unit drives the glass rack directly, and a movable loading machine works alongside it.
- Lower investment threshold: The design reduces overall equipment procurement cost, so you can start production with less initial investment.
- Fewer transmission links: The simplified structure removes complex transmission links, which supports steadier operation from shift to shift.
How the Storage Rack Supports Your Production Flow
Glass storage racks organize, store and transport glass sheets. In this glass cutting line, the rack carries up to 8T, has a depth of 280~470mm, and is driven directly by a motor unit.
Keeping sheets on a rack close to the cutting line shortens each move between storage and cutting. The compact layout also leaves more usable space in the workshop.
Applications
The glass cutting line with movable storage racks can be used for these glass-processing tasks within the listed size and thickness range:
- Architectural glass: Cut large sheets for windows, doors and curtain wall panels, up to 4200*2800mm.
- Furniture glass: Process furniture glass components in thicknesses from 3 to 19mm.
- Decorative glass: Prepare glass for decorative and home-decor items.
- Storage and handling: Keep sheets organized on the rack while they wait for cutting.
Electrical Components and Technical Documents
The electrical system uses components from brands including Shihlin, Schneider and Omron.
You receive paper and electronic documents, including the Installation Manual, Operation Manual and Circuit Diagrams. Your team can use them for installation, training and later maintenance.
Purchasing Checklist
Confirm these points before you place an order:
- Your largest glass size, compared with the 4200*2800mm maximum.
- Glass thickness, within 3~19mm.
- Single sheet weight, up to 1.5T.
- Rack load, up to 8T, and rack depth, from 280 to 470mm.
- Rack speed, up to 15m/min, compared with your output target.
Send these details and we will confirm whether the line fits your plant.
Why Choose Shandong Huashil
Shandong Huashil is a high-tech manufacturer that combines automated R&D, manufacturing and sales of mechanical equipment. We are a source factory with an R&D team and an after-sales team.
We have more than ten years of export experience. We offer OEM support and customized solutions.
FAQ
Q: What is the HSL-YPCC4228?
A: It is a glass cutting line. A motor unit drives the glass rack directly, and a movable loading machine works with it.
Q: Is this a patented machine?
A: Yes. The HSL-YPCC4228 is our patent product.
Q: What brands of electrical components do you use?
A: We use components from brands including Shihlin, Schneider and Omron.
Q: What technical documents can you provide?
A: We provide paper and electronic versions of the Installation Manual, Operation Manual and Circuit Diagrams.
Q: What glass can the line load?
A: The specification table lists a loading glass size of 42202800mm, thickness of 3~19mm and weight up to 1.5T. The maximum glass size is listed as 42002800mm.
Q: What are the rack load, depth and speed?
A: The rack carries up to 8T. Its depth is 280~470mm, and its maximum operating speed is 15m/min.
Q: Do you support OEM and customized solutions?
A: Yes. We support OEM and offer customized solutions.
Contact Us
Send your glass size and thickness to salescathy@sdhuashil.com. Our team will confirm whether the HSL-YPCC4228 fits your glass cutting line with movable storage racks plant.
